Laser Power: 1500W
Laser Source: GW
Laser Head: Wobble or static
Beam Mode: Continuously
Output Power Tunability (%): 10-100%
Laser Wavelength: 1080Â±5nm
Fiber Diameter: 100Î¼m
Frequency of plus: 50-200khz
Way of working: Continuous
Electric Current 10-50A
Spot Size: Î¦0.2-1.8mm
Welding Depth: 0.8-1mm
Impulse Width: Cooling System: Water cooling
Water Chiller: Samp;A CWFL-1500
Total Power: 8KW
Ambient Temperature: 10â-40â (50â-104â)
Relative Temperature: â¤70%
Protective Gas: argon/nitrogen
Power Supply: 3 Phase 380V 60Hz
Apply Materials: SS, CS, Aluminum, Brass etc. metal
Packing dimension: 205x92x128cm (80"x36"x50")
1. Is the welding machine is easy to operate?
Yes, the operating system can be set in English, And you just need to set some different parameters on the screen. There's no problem to learn how to use it in few hours."br" 2. What's the advantages of the wobble welding head?
Firstly, the process that the usual head can not complete, the wobble welding head only needs to use about 70% of the power. So the cost of the laser can be saved.
Secondly, wobble welding back and forth through the galvanometer motor. For material with large imparity, it can reduce bubble, fried point, splash, etc.
Thirdly, in the case of irregular gaps, the requirements for the fixtures can be reduced.
The usual head welding gap is generally 0.2mm. If over 0.2mm, light will go directly through it. There is no galvanometer motor in the welding head, so there is no swing. The welding effect is not good. And the welding process is limited. With wobble head, the width of the gap that can be welded can reach 0.5mm